1. product profile 1.1 general description ultra low capacitance quadruple rail-to-rail electrostatic discharge (esd) protection device in an sot457 (sc-74) small surface-mounted device (smd) plastic package. the device is designed to prot ect four high-speed data lines or high-frequency signal lines from the damage caused by esd and other transients. PRTR5V0U4D integrates four ultra low capacitance rail-to-rail esd protection channels and one additional esd protection diode to ens ure signal line protection even if no supply voltage is available. 1.2 features and benefits ? esd protection of four high-speed data lines or high-frequency signal lines ? ultra low input/output to ground capacitance: c (i/o-gnd) =1pf ? esd protection up to 8 kv ? iec 61000-4-2, level 4 (esd) ? very low clamping voltage due to an int egrated additional esd protection diode ? very low reverse current ? aec-q101 qualified ? small smd plastic package 1.3 applications ? usb 2.0 interfaces ? digital video interface (dvi) ? high-definition multim edia interface (hdmi) ? mobile phones ? digital cameras ? wan/lan systems ? pc, notebooks, printers and other pc peripherals PRTR5V0U4D ultra low capacitance quadruple rail-to-rail esd protection rev. 2 ? 5 march 2012 product data sheet sot457
PRTR5V0U4D all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2012. all rights reserved. product data sheet rev. 2 ? 5 march 2012 2 of 10 nxp semiconductors PRTR5V0U4D ultra low capacitance quadruple rail-to-rail esd protection 1.4 quick reference data [1] measured from pins 1, 3, 4 and 6 to pin 2. [2] measured from pin 5 to pin 2. 2. pinning information 3. ordering information 4. marking table 1. quick reference data t amb =25 ? c unless otherwise specified. symbol parameter conditions min typ max unit per channel c (i/o-gnd) input/output to ground capacitance v (i/o-gnd) =0v; v cc =3v; f=1mhz [1] -1.0-pf zener diode v i input voltage 0 - 5.5 v c sup supply pin to ground capacitance v (i/o-gnd) =0v; v cc =3v; f=1mhz [2] -40-pf table 2. pinning pin symbol description simplified outline graphic symbol 1 i/o1 input/output 1 2 gnd ground 3 i/o2 input/output 2 4 i/o3 input/output 3 5v cc supply voltage 6 i/o4 input/output 4 13 2 4 56 001aag273 1 2 3 6 5 4 table 3. ordering information type number package name description version PRTR5V0U4D sc-74 plastic surface-mounted package (tsop6); 6 leads sot457 table 4. marking code type number marking code PRTR5V0U4D 4d
PRTR5V0U4D all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2012. all rights reserved. product data sheet rev. 2 ? 5 march 2012 3 of 10 nxp semiconductors PRTR5V0U4D ultra low capacitance quadruple rail-to-rail esd protection 5. limiting values [1] device stressed with ten non-repetitive esd pulses. [2] measured from pin 1, 3, 4 or 6 to pin 2 or 5. table 5. limiting values in accordance with the absolute maximum rating system (iec 60134). symbol parameter conditions min max unit per device t j junction temperature - 150 ?c t amb ambient temperature ? 55 +150 ?c t stg storage temperature ? 65 +150 ?c table 6. esd maximum ratings t amb =25 ? c unless otherwise specified. symbol parameter conditions min max unit per channel v esd electrostatic discharge voltage iec 61000-4-2 (contact discharge) [1] [2] -8kv mil-std-883 (human body model) -8kv table 7. esd standards compliance standard conditions per channel iec 61000-4-2; level 4 (esd) > 8 kv (contact) mil-std-883; class 3b (human body model) > 8 kv fig 1. esd pulse waveform according to iec 61000-4-2 001aaa631 i pp 100 % 90 % t 30 ns 60 ns 10 % t r = 0.7 ns to 1 ns
PRTR5V0U4D all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2012. all rights reserved. product data sheet rev. 2 ? 5 march 2012 4 of 10 nxp semiconductors PRTR5V0U4D ultra low capacitance quadruple rail-to-rail esd protection 6. characteristics [1] measured from pins 1, 3, 4 and 6 to pin 2. [2] measured from pin 5 to pin 2. 7. application information the device is designed for the protection of for example, two usb 2.0 ports against esd. each device is capable to protect both, usb data lines and the v bus supply. 8. test information 8.1 quality information this product has been qualified in accordance with the automotive electronics council (aec) standard q101 - stress test qualificat ion for discrete semiconductors , and is suitable for use in automotive applications. table 8. characteristics t amb =25 ? c unless otherwise specified. symbol parameter conditions min typ max unit per channel i rm reverse leakage current v r =3v [1] - - 100 na c (i/o-gnd) input/output to ground capacitance v (i/o-gnd) =0v; v cc =3v; f=1mhz [1] -1.0-pf v f forward voltage - 0.7 - v zener diode v i input voltage 0 - 5.5 v v br breakdown voltage i i =1ma 6- 9v c sup supply pin to ground capacitance v (i/o-gnd) =0v; v cc =3v; f=1mhz [2] -40-pf fig 2. application diagram 001aah387 4 usb 2.0 ieee1394 controller 5 6 3 2 1 v bus v bus d+ d? gnd v bus d+ d? gnd
PRTR5V0U4D all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2012. all rights reserved. product data sheet rev. 2 ? 5 march 2012 5 of 10 nxp semiconductors PRTR5V0U4D ultra low capacitance quadruple rail-to-rail esd protection 9. package outline 10. packing information [1] for further information and the avai lability of packing methods, see section 14 . [2] t1: normal taping [3] t2: reverse taping fig 3. package outline sot457 (sc-74) 04-11-08 dimensions in mm 3.0 2.5 1.7 1.3 3.1 2.7 pin 1 index 1.9 0.26 0.10 0.40 0.25 0.95 1.1 0.9 0.6 0.2 13 2 4 5 6 table 9. packing methods the indicated -xxx are the last thre e digits of the 12nc ordering code. [1] type number package description packing quantity 3000 10000 PRTR5V0U4D sot457 4 mm pitch, 8 mm tape and reel; t1 [2] -115 -135 4 mm pitch, 8 mm tape and reel; t2 [3] -125 -165
PRTR5V0U4D all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2012. all rights reserved. product data sheet rev. 2 ? 5 march 2012 6 of 10 nxp semiconductors PRTR5V0U4D ultra low capacitance quadruple rail-to-rail esd protection 11. soldering fig 4. reflow soldering footprint sot457 (sc-74) fig 5. wave soldering footprint sot457 (sc-74) solder lands solder resist occupied area solder paste sot457_fr 3.45 1.95 2.8253.3 0.45 (6) 0.55 (6) 0.7 (6) 0.8 (6) 2.4 0.95 0.95 dimensions in mm sot457_fw 5.3 5.05 1.45 (6) 0.45 (2) 1.5 (4) 2.85 1.475 1.475 solder lands solder resist occupied area preferred transport direction during soldering dimensions in mm
PRTR5V0U4D all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2012. all rights reserved. product data sheet rev. 2 ? 5 march 2012 7 of 10 nxp semiconductors PRTR5V0U4D ultra low capacitance quadruple rail-to-rail esd protection 12. revision history table 10. revision history document id release date data sheet status change notice supersedes PRTR5V0U4D v.2 20120305 product data sheet - PRTR5V0U4D v.1 modifications: ? section 1 ? product profile ? : reshaped ? section 1.4 ? quick reference data ? : added ? section 2 : updated ? section 4 ? marking ? : added ? section 5 ? limiting values ? : reshaped and updated; junction temperature t j added; ta b l e 6 , table 7 and figure 1 added ? section 6 ? characteristics ? : reshaped; i lr redefined to i rm ? section 8 ? test information ? : added ? figure 3 : replaced by minimized outline drawing ? section 10 ? packing information ? : added ? section 11 ? soldering ? : added ? section 13 ? legal information ? : updated PRTR5V0U4D v.1 20080111 product data sheet - -
PRTR5V0U4D all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2012. all rights reserved. product data sheet rev. 2 ? 5 march 2012 8 of 10 nxp semiconductors PRTR5V0U4D ultra low capacitance quadruple rail-to-rail esd protection 13. legal information 13.1 data sheet status [1] please consult the most recently issued document before initiating or completing a design. [2] the term ?short data sheet? is explained in section ?definitions?. [3] the product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple device s. the latest product status information is available on the internet at url http://www.nxp.com . 13.2 definitions draft ? the document is a draft versi on only. the content is still under internal review and subject to formal approval, which may result in modifications or additions. nxp semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall hav e no liability for the consequences of use of such information. short data sheet ? a short data sheet is an extract from a full data sheet with the same product type number(s) and title. a short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. for detailed and full information see the relevant full data sheet, which is available on request vi a the local nxp semiconductors sales office. in case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. product specification ? the information and data provided in a product data sheet shall define the specification of the product as agreed between nxp semiconductors and its customer , unless nxp semiconductors and customer have explicitly agreed otherwis e in writing. in no event however, shall an agreement be valid in which the nxp semiconductors product is deemed to offer functions and qualities beyond those described in the product data sheet. 13.3 disclaimers limited warranty and liability ? information in this document is believed to be accurate and reliable. however, nxp semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such info rmation. nxp semiconductors takes no responsibility for the content in this document if provided by an information source outside of nxp semiconductors. in no event shall nxp semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. notwithstanding any damages that customer might incur for any reason whatsoever, nxp semiconductors? aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the terms and conditions of commercial sale of nxp semiconductors. right to make changes ? nxp semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use in automotive applications ? this nxp semiconductors product has been qualified for use in automotive applications. unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an nxp semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. nxp semiconductors and its suppliers accept no liability for inclusion and/or use of nxp semiconducto rs products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. applications ? applications that are described herein for any of these products are for illustrative purpos es only. nxp semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers are responsible for the design and operation of their applications and products using nxp semiconductors products, and nxp semiconductors accepts no liability for any assistance with applications or customer product design. it is customer?s sole responsibility to determine whether the nxp semiconductors product is suitable and fit for the customer?s applications and products planned, as well as fo r the planned application and use of customer?s third party customer(s). customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. nxp semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer?s applications or products, or the application or use by customer?s third party customer(s). customer is responsible for doing all necessary testing for the customer?s applic ations and products using nxp semiconductors products in order to av oid a default of the applications and the products or of the application or use by customer?s third party customer(s). nxp does not accept any liability in this respect. limiting values ? stress above one or more limiting values (as defined in the absolute maximum ratings system of iec 60134) will cause permanent damage to the device. limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the recommended operating conditions section (if present) or the characteristics sections of this document is not warranted. constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. terms and conditions of commercial sale ? nxp semiconductors products are sold subject to the gener al terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , unless otherwise agreed in a valid written individual agreement. in case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. nxp semiconductors hereby expressly objects to applying the customer?s general terms and conditions with regard to the purchase of nxp semiconducto rs products by customer. document status [1] [2] product status [3] definition objective [short] data sheet development this document contains data from the objecti ve specification for product development. preliminary [short] data sheet qualification this document contains data from the preliminary specification. product [short] data sheet production this document contains the product specification.
PRTR5V0U4D all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2012. all rights reserved. product data sheet rev. 2 ? 5 march 2012 9 of 10 nxp semiconductors PRTR5V0U4D ultra low capacitance quadruple rail-to-rail esd protection no offer to sell or license ? nothing in this document may be interpreted or construed as an offer to sell products t hat is open for acceptance or the grant, conveyance or implication of any licens e under any copyrights, patents or other industrial or intellectual property rights. export control ? this document as well as the item(s) described herein may be subject to export control regu lations. export might require a prior authorization from competent authorities. quick reference data ? the quick reference data is an extract of the product data given in the limiting values and characteristics sections of this document, and as such is not comp lete, exhaustive or legally binding. 13.4 trademarks notice: all referenced brands, produc t names, service names and trademarks are the property of their respective owners. 14. contact information for more information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com
nxp semiconductors PRTR5V0U4D ultra low capacitance quadruple rail-to-rail esd protection ? nxp b.v. 2012. all rights reserved. for more information, please visit: http://www.nxp.com for sales office addresses, please se nd an email to: salesaddresses@nxp.com date of release: 5 march 2012 document identifier: PRTR5V0U4D please be aware that important notices concerning this document and the product(s) described herein, have been included in section ?legal information?. 15. contents 1 product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 general description . . . . . . . . . . . . . . . . . . . . . 1 1.2 features and benefits . . . . . . . . . . . . . . . . . . . . 1 1.3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 quick reference data . . . . . . . . . . . . . . . . . . . . 2 2 pinning information . . . . . . . . . . . . . . . . . . . . . . 2 3 ordering information . . . . . . . . . . . . . . . . . . . . . 2 4 marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 7 application information. . . . . . . . . . . . . . . . . . . 4 8 test information . . . . . . . . . . . . . . . . . . . . . . . . . 4 8.1 quality information . . . . . . . . . . . . . . . . . . . . . . 4 9 package outline . . . . . . . . . . . . . . . . . . . . . . . . . 5 10 packing information . . . . . . . . . . . . . . . . . . . . . 5 11 soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 12 revision history . . . . . . . . . . . . . . . . . . . . . . . . . 7 13 legal information. . . . . . . . . . . . . . . . . . . . . . . . 8 13.1 data sheet status . . . . . . . . . . . . . . . . . . . . . . . 8 13.2 definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 13.3 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 13.4 trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 14 contact information. . . . . . . . . . . . . . . . . . . . . . 9 15 contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
|
